• JSD 3 phase transformer 415v 400V three phase transformer manufacturers
  • JSD 3 phase transformer 415v 400V three phase transformer manufacturers
  • JSD 3 phase transformer 415v 400V three phase transformer manufacturers
  • JSD 3 phase transformer 415v 400V three phase transformer manufacturers
  • JSD 3 phase transformer 415v 400V three phase transformer manufacturers
  • JSD 3 phase transformer 415v 400V three phase transformer manufacturers
  • JSD 3 phase transformer 415v 400V three phase transformer manufacturers
  • JSD 3 phase transformer 415v 400V three phase transformer manufacturers
  • JSD 3 phase transformer 415v 400V three phase transformer manufacturers
  • JSD 3 phase transformer 415v 400V three phase transformer manufacturers
  • JSD 3 phase transformer 415v 400V three phase transformer manufacturers
  • JSD 3 phase transformer 415v 400V three phase transformer manufacturers

JSD 3 phase transformer 415v 400V three phase transformer manufacturers

Factory-direct 3 phase transformer for 415 V and 400 V systems, 500 VA to 2000 kVA, dry-type cooled, copper or aluminum windings, custom voltages.
  • JSD 3 phase transformer 415v 400V three phase transformer manufacturers
  • JSD 3 phase transformer 415v 400V three phase transformer manufacturers
  • JSD 3 phase transformer 415v 400V three phase transformer manufacturers
  • JSD 3 phase transformer 415v 400V three phase transformer manufacturers
  • JSD 3 phase transformer 415v 400V three phase transformer manufacturers
  • JSD 3 phase transformer 415v 400V three phase transformer manufacturers

Description

Product Overview

Jinshide builds this dry-tape unit for industrial voltage conversion and distribution where the site supply and the load do not match. Each unit is wound to the connection, insulation class and conductor material the job calls for, rather than forced into a catalogue standard. This is not a plug-in consumer product: it is a dry-type transformer built by industrial transformer manufacturers for panel builders, plant engineers, EPC teams and maintenance departments that need a defined input/output relationship and a unit built to sit in their distribution room.

Low-loss core: High-permeability silicon steel, built as an EI- or CD-laminated core depending on the rating, keeps core loss and audible noise low.

Conductor choice: Copper windings suit higher-efficiency, heavier-duty cycles; aluminum windings bring weight and cost down on lighter loads. Both are wound in-house to the specified class.

Dry-tape cooling: There is no liquid dielectric to fill or manage, which simplifies indoor installation and routine inspection.

Stable output: Work efficiency of at least 90% and a rated voltage of 3000 V support steady three-phase supply for motors, drives and control equipment.

Straightforward connection: Brass terminal studs along the top rail, color-coded leads and a marked green-and-yellow ground lead make the wiring points easy to identify.

Low routine maintenance: Once installed and torqued to the site procedure, the 3 phase transformer needs no day-to-day servicing beyond normal electrical checks.

Adaptable build: Enclosure style, finish and environmental protection can be adapted for dusty, humid or restricted spaces, within the limits agreed at quotation.

Three-phase transformer with red cylindrical coil windings and brass terminal bars

Quality Control & Inspection

As three phase transformer manufacturers, we run a 100% inspection system and eight quality-control checkpoints from raw-material warehousing to finished-product dispatch. That starts with incoming checks on silicon steel, conductor and insulation materials, continues through winding, core assembly and terminal work, and ends with routine electrical tests before packing. Each unit is checked for insulation strength, ratio and connection integrity against the approved drawing; the test record travels with the transformer so your maintenance team has a baseline. The same process covers IEC60076 and EN 61558-2-4 reference standards, and any project-specific inspection or documentation requirement should be agreed before production so it is built into the route card. If a unit fails a checkpoint, it is held for rework and retest rather than pushed through to meet a shipping date.

Project Feedback

Buyers come back to three phase transformer manufacturers for repeat builds, and the feedback tends to focus on the same practical points. One customer ordering a custom single-phase control transformer said the special transformers consistently met their requirements and that they now trust the supplier after several projects. A 100 kVA dry-type power transformer buyer reported a dedicated vehicle delivery to the construction site, a successful inspection on arrival, and a smooth process dealing directly with the manufacturer. A factory that installed three-phase dry-tape isolation transformers noted robust enclosures that did not overheat, ample capacity, stable voltage and enough power for the machines. A mine transformer customer repurchased the same 25 kVA unit after testing the first one, reporting that the quality met expectations again. These are project comments rather than laboratory reports, but they show the kind of repeat and referral business the factory is built on.

Voltage & Winding Configuration

The electrical configuration is where most projects are won or lost. Primary windings cover 220 V through 480 V and secondary windings 100 V through 380 V, with custom values built to order rather than limited to a standard list. For a 3 phase transformer 400V specification, confirm whether the 400 V side is the supply or the load, because that decides which winding is primary and which is secondary. Winding connections Dy, Dd, Dyn, Yy, Yyn and Yd are available on request; the choice affects neutral availability, phase shift and how the unit interfaces with existing switchgear. Insulation class B, F or H is selected for the expected temperature rise, and copper or aluminum conductors are chosen against load profile, weight and budget. Send the full electrical picture, not just a kVA figure, so the winding layout, tap arrangement and terminal positions suit the panel it will feed.

Installation & Site Fit

Plan the installation around the transformer's weight, terminal access and ventilation, not just the footprint. The slotted black base is designed to bolt to a prepared floor frame or steel plinth, and the open-frame layout leaves the top terminal studs and color-coded leads accessible for cable dressing. Bring the supply and load cables in with enough slack to torque the brass terminals without strain, and bond the green-and-yellow ground lead to the site earth before energizing. Leave clearance above the unit for inspection and for heat to rise away from the coils, and keep the area free of stored stock that could block airflow. For a 3 phase transformer 400V build, check phase rotation, voltage at the secondary terminals and insulation resistance before connecting the load; then log the readings against the nameplate for the maintenance file. If the unit is going into a dusty or humid room, agree the enclosure and finish at the quotation stage rather than adding site-made covers later.

Industrial Applications

  • Production lines and machine tools: A 3 phase transformer 415V build matches European machine nameplates to a site supply, keeping drives, servos and controls on the voltage they were designed for.
  • Plant distribution rooms: Step-down or voltage-matching duty for sub-distribution boards feeding mixed industrial loads.
  • Control panels and integrators: Panel builders specify dry-type units where a liquid-filled transformer is not suitable for the enclosure or room.
  • Commercial and infrastructure power rooms: Voltage conversion for HVAC plant, pumps, lifts and building services where 400 V or 415 V equipment is installed.
  • Replacement and expansion: When an existing transformer is obsolete or a line is added, three phase transformer manufacturers can wind a new unit to the same input/output relationship and terminal arrangement.
  • OEM equipment packages: Equipment makers buy the transformer as part of a skid or package and need the electrical configuration to match their own drawings.
  • Testing and commissioning: A defined primary and secondary voltage makes it easier to verify phase rotation, tap settings and load behaviour before handover.

Related Transformer Models

  • Furnace and high-current heating transformers: ABK-500VA low-voltage single-phase furnace transformer (380 V/220 V to 50 V/36 V/24 V/12 V/10 V); BK-4.5KVA single-phase high-current heating transformer (380 V/220 V to 12 V/24 V/36 V); BK-15KVA low-voltage single-phase high-current furnace transformer (380 V/220 V to 36 V, 10 V, 8 V, 6 V, 5 V, 4 V, 3 V, 2 V, 1.5 V); 5KVA low-voltage single-phase high-current furnace transformer (380 V/220 V to 50 V, 36 V, 24 V, 12 V, 10 V); SBK-80KVA three-phase low-voltage high-current furnace heating transformer (380 V to 45 V, 60 V, 70 V); 15KVA three-phase low-voltage high-current furnace heating transformer with isolation and full-copper windings; SBK-100KVA low-voltage high-current heating transformer (1/2/3/4/5/6/8/10/12 V).
  • Three-phase dry-tape isolation and step-up/down transformers: SBK-500KVA three-phase isolation transformer (380 V/220 V/415 V to 400 V/415 V/230 V/100 V); 20KVA dry-tape isolation transformer (380 V/220 V to 200 V/208 V/415 V/480 V); SBK-5KVA step-up/down dry-tape three-phase transformer (690 V/660 V/415 V to 208 V/230 V/110 V); SBK-15KVA three-phase dry-tape isolation transformer (380 V/400 V/230 V to 415 V/440 V/480 V); SG-500KVA step-up transformer; SG-100KVA dry-tape isolation step-down transformer; SG-15KVA dry isolation transformer (380 V/400 V to 220 V/200 V/240 V); SG-500KVA three-phase isolation transformer (660 V/1140 V/690 V/230 V/415 V to 400 V/660 V/100 V/110 V); SG-100KVA isolation transformer (480 V/400 V/415 V/200 V to 208 V/230 V/100 V); SG-20KVA three-phase dry-tape isolation transformer (415 V/400 V/380 V to 200 V/100 V/230 V); 25KVA three-phase dry-tape isolation transformer (415 V/400 V/380 V to 200 V/100 V/230 V); SG-800KVA photovoltaic step-up three-phase isolation transformer (415 V/400 V to 230 V/380 V); SG-350KVA full-copper three-phase dry-tape step-up/down isolation transformer; SBK-50KVA three-phase transformer (440 V/415 V/480 V to 220 V/200 V/660 V/690 V); step-up transformer configurations for 380 V/220 V/208 V to 480 V/600 V/575 V/440 V/415 V.
  • Other isolation and control models: single-phase low-voltage high-current control transformer (380 V to 36 V, 45 V, 60 V, 70 V) for silicon molybdenum rods, silicon carbide rods and vacuum sintering furnaces; single-phase low-voltage high-current transformer (380 V to 36 V, 45 V, 60 V, 70 V); SG-5KVA three-phase low-voltage high-current furnace heating/control transformer (380 V to 185 V, 110 V, 55 V, 24 V, 12 V); 100KVA three-phase low-voltage high-current furnace heating transformer (380 V to 60 V, 48 V, 36 V, 24 V, 12 V, 8 V).

Technical Specifications

Rated power500 VA to 2000 kVA
Primary voltage480 V, 440 V, 415 V, 400 V, 380 V, 220 V (custom voltages available)
Secondary voltage380 V, 230 V, 220 V, 208 V, 200 V, 100 V (custom voltages available)
Frequency50/60 Hz
Insulation classB / F / H (upon customer request)
Winding connectionDy / Dd / Dyn / Yy / Yyn / Yd (upon customer request)
Work efficiency≥90%
Rated voltage3000 V
Insulation strength>100 MΩ (DC500 V)
Noise≤60 dB
Dielectric strengthUpon customer request
ImpedanceUpon customer request
Winding materialCopper / aluminum
Cooling typeDry-tape

Ordering & Delivery

  1. Ordering is handled directly with the factory. The steps below show what happens from inquiry to dispatch, including the commercial terms that apply to this product.
  2. Send the electrical data. Include the primary and secondary voltage, kVA rating, frequency, winding connection, insulation class, load type and any site constraints. A 3 phase transformer 415V specification should state whether 415 V is the supply or the load, and the same rule applies to any other voltage on the nameplate.
  3. Get the configuration reviewed. We check the data against the available winding, core and terminal arrangements, and come back with a proposed build or a request for missing detail. Because we are industrial transformer manufacturers, the review is done by the engineering team that will release the drawing.
  4. Receive the quotation. We typically provide a detailed quote within 24 hours of receiving a complete inquiry. You can send it to JSD@jsd-voltagetransformer.com or WhatsApp +86 135 1660 7609; for project enquiries, call 0086-153-9087-8333.
  5. Confirm the order and payment. We accept TT, Electronic Payment, ACH, SEPA, SWIFT, Alipay, WeChat Pay and Prepaid Card. Orders start at ≧ 1 set.
  6. Production lead time. Lead time is 3 to 25 working days, depending on the order quantity and the complexity of the customization. The exact date is fixed on the order confirmation.
  7. Inspection and packing. Every unit is inspected before packing. Packing is international wooden cases or according to the actual transport needs, so the transformer, terminals and leads are protected for the route.
  8. Warranty and after-sales. The transformer carries a minimum 12-month warranty, with extended warranty options available depending on project requirements. Keep the test record and nameplate data with the installation file for any future service query.
  9. Most of our work is built to a specification rather than pulled from a shelf, and that is where industrial transformer manufacturers earn their keep. We customise the electrical and mechanical package around your application: - Voltage and capacity: Any combination within the published ranges, plus custom values where the site or equipment demands them.
  10. Winding connection and insulation: Dy, Dd, Dyn, Yy, Yyn or Yd connections and B, F or H insulation class selected for the duty.
  11. Conductor material: Copper or aluminum windings, chosen for load profile, weight limits and budget.
  12. Enclosure and finish: Adapt the frame, terminal arrangement and surface finish for indoor rooms, dusty areas or restricted access.
  13. Drawings first: A technical drawing is the fastest starting point because it fixes dimensions, terminal positions and connection details.
  14. If you have no drawing: Send the power rating, primary and secondary voltage, installation size limits, insulation class, frequency and any special environmental conditions. Add the load type and duty cycle if the transformer will feed motors, drives or furnace equipment.
  15. Approval before production: We review the configuration against your data and confirm the build before winding starts, so changes do not appear after the core is assembled.

Technical Support & Model Matching

Because we build in our own factory, the engineers who answer your questions are the same people who configure the units on the line. Send us your input and output voltages, load, frequency and site conditions, and we will match the right model or design a custom unit to suit. Our team stays with you from first enquiry through installation and commissioning, helps trace faults, and specifies spare or replacement units for equipment already in service. Twenty years of manufacturing know-how sits behind that support, so the technical answer comes with a build you can rely on.

FAQ

What voltage combinations can this transformer be built for?

Primary windings can be set from 220 V through 480 V, and secondary windings from 100 V through 380 V, with custom values available outside those ranges. A 3 phase transformer 400V configuration is one of the common builds, and 415 V, 480 V, 440 V, 380 V and 220 V primary options are also offered. Tell us which side is the supply and which is the load, and we will confirm the winding arrangement before production.

Which winding connection is right for my application?

The connection depends on whether you need a neutral, how the transformer will interface with existing switchgear, and the phase shift your system can accept. For a 3 phase transformer, we can build Dy, Dd, Dyn, Yy, Yyn and Yd connections on request. Bring the single-line diagram or the existing nameplate details, and our engineer will match the connection rather than leave you to guess.

Is this a step-up or a step-down transformer?

It can be wound for either duty within the published voltage limits. A 3 phase transformer 415V unit can step down to 400 V, 380 V or another secondary value, and the same platform can step up where the load requires a higher output. The deciding factors are the supply voltage, the load voltage and the duty cycle, so confirm those three points before the build is released.

Should I choose copper or aluminum windings?

Copper gives higher conductivity and is the usual choice for heavier duty cycles, tighter voltage regulation or projects where long-term efficiency matters. Aluminum reduces weight and cost on lighter loads, but it needs a design that accounts for its different conductivity. Both are available, and the right choice depends on the load profile, the panel or room weight limit, and the budget for the project.

How does dry-tape cooling differ from oil-immersed cooling?

This transformer is dry-tape cooled, so there is no liquid dielectric to fill, test or replace. That makes it suited to indoor distribution rooms and panel-adjacent installations where an oil-filled unit would need containment and extra site work. Oil-immersed transformers are a separate family for other project conditions. For this unit, keep the coils and airways clear and follow the normal electrical checks in your maintenance schedule.

Can the transformer be customized for a dusty or humid room?

Yes. We can adapt the frame, terminal arrangement, surface finish and environmental protection for indoor rooms, dusty areas or restricted access. The limits are agreed at quotation, because a site-made cover or an unventilated enclosure can change the thermal behaviour of the transformer. Send the room conditions, available space and any ingress requirement with the inquiry, and the build will be reviewed against them.

What standards does the transformer reference?

The unit is built to IEC60076 and EN 61558-2-4 reference standards. If your project needs a specific standard, documentation package or inspection witness point, send the requirement with the inquiry so the build and test plan can be aligned before production.

When should I choose this model instead of a step-up transformer?

Choose this model when the job is general three-phase voltage conversion or distribution within the 220 V to 480 V primary and 100 V to 380 V secondary range. Industrial transformer manufacturers would specify a dedicated step-up transformer when the load needs a higher output voltage than the site supply. Here, the winding can be arranged for step-up or step-down duty within the stated limits, but the application and duty cycle should be reviewed before the build is released.

Get Started

We make it easy to get a quote and order a transformer. Follow the steps below to get started.

Recent Feedback

Single-Phase Control Transformer BK-400va

The custom-made special transformers always meet my requirements, and they are excellent. We've worked together several times now, and I trust them completely

100Kva Dry Tape Power Trans,Full Copper

A dedicated vehicle delivered the equipment to the construction site, and I am very satisfied. The transformer has been successfully inspected, and working directly with the manufacturer has been very satisfactory. There are a few more projects coming up, and I look forward to continuing our collaboration!

3-Phase Dry Tape Isolation Transformer

The factory has introduced machines recommended by a Chinese supplier. These include three-phase transformers with robust enclosures that do not overheat during operation, have ample capacity, provide stable voltage, and deliver sufficient power

Explosion-proof mine transformer,25Kva

I bought one before, and the transformer worked well. This time, I’m repurchasing it. After receiving the item, I tested it, and the quality is excellent. It has once again met my expectations, and I’m very pleased

We're ready to help

Call our toll-free number 0086-153-9087-8333 or complete the following inquiry form and our team will get back to you as soon as possible
Request A Quote

Request A Quote

Product Type *
Transformer
Vlotage stabilizer
Select Phase and kVA Rating *
Single Phase
Three Phase
10-20kva
21-30kva
Company *
My company is a *
Transformer
Single Phase
First Name *
last and First
LastName *
Email *
Phone *
Delivery Time *
1
2
3
Additional Information *
Upload Files *
updown